发表论文：
[1]. Gong Z , Li B* , Zhang H , et al. Tool orientation optimization method based on ruled surface using genetic algorithm[J]. The International Journal of Advanced Manufacturing Technology, 2021.
[2]. Jiang J* , Li B , Lin F , et al. Prediction and compensation strategy of contour error in multi-axis motion system[J]. Springer London, 2021.
[3]. Zhang C, Li B*, Ye P, et al. Analog-Hall-Sensor-Based Position Detection Method With Temperature Compensation for Permanent-Magnet Linear Motor[J]. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 1-11.
[4]. Zhang C, Li B*, Ye P, et al. Analysis and Compensation of Hall Sensor-Based Position Detection Errors in TPMSLM[J]. IEEE Sensors Journal, 2021, 21(20): 22612-22622.
[5]. Zhang C, Li B*, Zhang H, et al. Sensorless Control of Tubular Permanent magnet synchronous Linear Motor Considering the End Effect[C]//2021 IEEE 5th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC). IEEE, 2021, 5: 999-1004.
[6]. Zhang L*, Li B, Zhang C, et al. Optimization of Permanent Magnet Structure Parameters in Tubular Permanent Magnet Synchronous Linear Motor for HF Square-Wave Injection Sensorless Algorithm[C]//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2021, 85437: V007T07A049.
[7]. Xiao J, Li B*, Fang J, et al. Efficient Feedrate Optimization Method for Spline Toolpath Based on Typical Characteristics of Integral Impeller[C]//ASME International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021, 85567: V02BT02A054.
[8]. Jiang J*, Lin F, Li B, et al. A Two-step Tuning Method of Control Parameters for Permanent Magnet Synchronous Linear Motor[C]//2021 IEEE 5th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC). IEEE, 2021, 5: 1029-1034.
[9]. Li B, Zhang H, Ye P*, et al. Trajectory smoothing method using reinforcement learning for computer numerical control machine tools[J]. Robotics and Computer-Integrated Manufacturing, 2020, 61: 101847.
[10]. Wu J*, Li B, Zhang H, et al. Research on Adaptive Feedrate Planning of NURBS Curves for CNC System[C]//2019 2nd World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM). IEEE, 2019: 645-652.
[11]. Li B*, Zhang H, Ye P. Error constraint optimization for corner smoothing algorithms in high-speed CNC machine tools[J]. The International Journal of Advanced Manufacturing Technology, 2018, 99(1): 635-646.
[12]. Li B*, Zhang H, Ye P. Driving force constraint corner smoothing method for high-speed machine tools[C]//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017, 58202: V006T10A012.
[13]. 李炳燃*, 张辉, 叶佩青. 永磁同步直线电机霍尔位置检测传感器的优化[J]. 中国机械工程, 2017, 28(024):2913-2918.
[14]. 李炳燃, 张辉, 叶佩青*. 智能制造环境下的数控系统发展需求*[J]. 航空制造技术, 2017, 60(6):24-30.
授权发明专利：
[1]. 陈炜铧, 李炳燃等. 机床旋转轴几何误差识别方法,装置及存储介质. 中国, ZL202111299886.0, 2022.
[2]. 李炳燃, 肖建新等. 一种提升螺纹车削加工精度的主轴跟随同步控制方法. 中国，ZL202010680141.8, 2021.
[3]. 李炳燃, 方俊等. 一种基于神经网络的数控系统运动轨迹控制方法. 中国， ZL202010680809.9, 2021.
[4]. 宫政, 李炳燃等. 一种基于直纹面空间的五轴铣削刀轴矢量优化方法. 中国, ZL202011003079.5, 2021.
[5]. 李炳燃, 叶佩青, 张辉. 一种恒力约束条件下的数控机床加减速速度规划方法. 中国，ZL201910149425.1, 2020.
[6]. 李炳燃, 叶佩青, 张辉. 一种基于电路板的多叶准直器电机引线固定结构. 中国，ZL201610143411.5, 2018.
